Ricoh C211 Service Manual page 121

2.7 1ST ORIGINAL SENSOR REPLACEMENT: VT2300/2500
L#$+/"]
[H]
1. Remove the screw securing the stopper [A] (1 screw),
2. Remove the platen plate [B] (2 screws),
3. Remove the original guide [C] (4 screws).
4. Remove the ADF unit cover [D] (5 screws).
5. Unhook the both hook springs [E].
6. Remove the separation guide plate [F] (4 screws).
7. Remove the separation blade assembly [H] (1 screw),
8. Disconnect the 1st original sensor connector [1].
9. Remove the sensor from the sensor bracket.
5-9