Table Of Periodic Inspection (Every 6 Months) - Ricoh C226 Service Manual

MAINTENANCE TABLES

1.3 TABLE OF PERIODIC INSPECTION (every 6 months)

Item/Location
Original platen cover
Exposure glass
Mirror/Sub mirror
Thermal head
Platen roller
Sensors
Press roller
Drum surface
Master feed and
delivery
Paper feed and delivery inspection
Second paper feed
rollers
Original transport roller
ADF
ADF pick-up, reverse,
feed rollers
ADF R1, R2, R3 rollers cleaning
SM
Step
cleaning Wipe off the stain with soft cloth dampened with
ethyl alcohol.
cleaning Wipe with cloth and glass cleaner.
cleaning Use blower brush.
cleaning and Wipe off the stain on the thermal head using
image check thermal head cleaning kit. Check the print image.
White line must not exist.
cleaning Wipe off the paper powder with cloth dampened
with water.
inspection Check the performance of all the sensors. Remove
and cleaning the stains from sensors with dry cloth.
cleaning Wipe off the ink and paper powder with cloth
dampened with ethyl alcohol.
cleaning Wipe off the ink which is forced out from trail edge
of a master and paper powder using cloth
dampened with ethyl alcohol.
inspection Master should be properly fed and clamped,
without generation of skew, fold. etc. Master
should also be properly delivered without jam.
Print a few sheets to ensure that paper is smoothly
fed and delivered, without generation of skew,
folds, wrinkles, etc.
cleaning Wipe off the ink and paper powder with cloth
dampened with alcohol.
cleaning Wipe off paper powder with cloth dampened with
water.
cleaning Wipe off paper powder with cloth dampened with
water.
Wipe off paper powder with cloth dampened with
water.
4-2
Inspection Standard
C226