Pwa-Dwnld-350-Jig2 (48 Mb) <Master Data> - Toshiba e-STUDIO520 Service Handbook

6.1.1 PWA-DWNLD-350-JIG2 (48 MB) <Master data>
The master data written on the hard disk can be updated. Update the master data according to the
need such as the case of replacing the hard disk.
The data to be overwritten are as follows.
• HDD program data (RIP data, list data, Web data, filing box control data)
• UI data (fixed section data, common section data, the language 1 to 7 data, the language 1 to 6 data
for Web)
[A] Update procedure
Important:
• Use the download jig "PWA-DWNLD-350-JIG2 (48 MB)".
• Turn OFF the power before installing and removing the download jig.
• Do not turn OFF the power during the update. The data could be damaged and not be oper-
ated properly.
(1) Write the data to the download jig.
P.6-26 "6.1.3 Writing the data to the download jig (PWA-DWNLD-350-JIG)"
(2) Shut down the equipment.
(3) Remove the cover plate.
(4) Connect the download jig with the jig connector (CN107) on the SYS board.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Cover plate
Fig. 6-3
Connector
Fig. 6-4
6 - 5
e-STUDIO520/523/600/603/720/723/850/853
FIRMWARE UPDATING
6