Firmware Updating With Pwa-Dwnld-350-Jig2 - Toshiba e-STUDIO2020C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2020C:

Table of Contents

Firmware Updating with PWA-DWNLD-350-JIG2

The data to be overwritten by this update are as follows.

Update the ROM data written on each board according to the need such as the case of replacing the

system control PC board or logic PC board.

(Main firmware)

PWA-DWNLD-350-JIG2 (48MB)

The download jig (PWA-DWNLD-350-JIG2) is the jig in which the Flash ROM is mounted on the

board directly. Therefore, ROM writer adapter (PWA-DL-ADP-350) is required to write the data to

these Flash ROMs. Refer to the following to write the data.

( for SYS board

connection )

System control PC board

Logic PC board

( for ROM writer

adapter connection )

e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C

FIRMWARE UPDATING