Toshiba e-STUDIO206L Service Manual page 1469

Sub
05/08 Mode Element
element
08 Setting System User
mode interface
08 Setting System General
mode
08 Setting System User
mode interface
08 Setting System User
mode interface
08 Setting System User
mode interface
08 Setting System User Energy save
mode interface
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
9102
9103
9110
9111
9112
9113
Sub- Default Acceptable
Details
code value value
Date display format Refer to 0~2
contents
Time differences EUR: 24 0~47
UC: 40
JPN: 6
Auto-clear timer 3 0~10
setting
Auto power save 4 0~15
mode timer setting
Auto Shut Off timer 21 0~21
setting (Sleep Mode)
Screen setting for Refer to 0~1
automatic energy contents
saver / automatic
power OFF
126
RAM Contents
SYS 0: YYYY.MM.DD. 1: DD.MM.YYYY 2: MM.DD.YYYY
<Default value>
EUR: 1
UC: 2
JPN: 0
SYS 0: +12.0h 1: +11.5h2: +11.0h 3: +10.5h 4: +10.0h 5:
+9.5h
6: +9.0h 7: +8.5h 8: +8.0h 9: +7.5h 10: +7.0h 11: +6.5h
12: +6.0h 13: +5.5h 14: +5.0h 15: +4.5h 16: +4.0h 17:
+3.5h
18: +3.0h 19: +2.5h 20: +2.0h 21: +1.5h 22: +1.0h 23:
+0.5h
24: 0.0h 25: -0.5h 26: -1.0h 27: -1.5h 28: -2.0h 29: -
2.5h
30: -3.0h 31: -3.5h 32: -4.0h 33: -4.5h 34: -5.0h 35: -
5.5h
36: -6.0h 37: -6.5h 38: -7.0h 39: -7.5h 40: -8.0h 41: -
8.5h
SYS Timer to return the equipment to the default settings
when the [START] button is not pressed after the
function and the mode are set 0: Not cleared 1 to 10:
Set number x 15 sec.
SYS Timer to automatically switch to the Auto power save
mode when the equipment has not been used.
0: Invalid 4: 1 min. 6: 3 min. 7: 4 min. 8: 5 min. 9: 7
min. 10: 10 min. 11: 15 min. 12: 20 min. 13: 30 min.
14: 45 min. 15: 60 min.
SYS Timer to turn OFF the power or to enter the Sleep
Mode automatically when the equipment has not been
used.
0: 3 min. 1: 5 min. 2: 10 min. 3: 15 min. 4: 20 min. 5:
25 min. 6: 30 min. 7: 40 min. 8: 50 min. 9: 60 min.
10: 70 min. 11: 80 min. 12: 90 min. 13: 100 min. 14:
110 min. 15: 120 min. 16: 150 min. 17: 180 min. 18:
210 min. 19: 240 min. 20: Disabled 21: 1 min.
SYS 0: OFF 1: ON
<Default value>
JPD/NAD: 1
Others: 0
Proc Service
edure UI
1
1
1
1 Yes
1 Yes
1 Yes