Firmware Updating With Pwa-Dwnld-350-Jig2 - Toshiba e-STUDIO6520C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO6520C:

Table of Contents

Firmware Updating with PWA-DWNLD-350-JIG2

The data to be overwritten by this update are as follows.

Update the ROM data written on each board according to the need such as the case of replacing the

system control PC board, logic PC board or scanning section control PC board.

(Main firmware)

PWA-DWNLD-350-JIG2 (48MB)

The download jig (PWA-DWNLD-350-JIG2) is the jig in which the Flash ROM is mounted on the

board directly. Therefore, ROM writer adapter (PWA-DL-ADP-350) is required to write the data to

these Flash ROMs. Refer to the following to write the data.

e-STUDIO5520C/6520C/6530C

FIRMWARE UPDATING

( for SYS board

connection )

Fig. 8-14 Jig board: PWA-DWNLD-350-JIG2 (48 MB)

Logic PC board

Paper feeding control board

( for ROM writer

adapter connection )

Show Quick Links

Table of Contents

E-studio5520c E-studio6530c