STATus Commands
:STATus
Description
Query Syntax
Return parameter <String>
:STATus:CONDition
Description
Query Syntax
Return parameter <NR1>
Example
Note
:STATus:EESE
Description
Syntax
:STATus .................................................................... 187
:STATus:CONDition ................................................ 187
:STATus:EESE .......................................................... 187
:STATus:EESR .......................................................... 188
:STATus:ERRor ......................................................... 188
:STATus:FILTer<x> .................................................. 189
:STATus:QENable .................................................... 190
:STATus:QMESsage ................................................. 190
Returns all the settings for the communication
status feature.
:STATus?
Returns the contents of the condition register.
:STATus:CONDition?
0 to 65535
:STATUS:CONDITION?
-> 8
For information about the condition register, see
Appendix,"Status system" at page 209.
Sets or returns the extended event enable register.
:STATus:EESE {<NRf>}
COMMAND OVERVIEW
Query
Query
Set
Query
187