Terminal Window; Figure 5-8: Terminal Window; Table 5-3: Terminal Window Toolbar - Teledyne 440 System Manual

❐
Red indicates an uncleared error.
❐ Yellow indicates an event.
❐
Green indicates an information message.
The System Errors window includes a status line that has two data fields. These show the total number
of cleared and uncleared errors since you started DeepView for Windows.

5.3.2.6 Terminal Window

The Terminal Window, shown in
the altimeter. It has a toolbar, a client area that displays black text against a white background, and a
status bar.
The figure shows the Terminal Window displaying data packets from the 440 SEP in the client area. If
you select the altimeter as the active serial device, the client area will show data packets from this
device instead.

Figure 5-8: Terminal window

Table 5-3: Terminal Window toolbar

Button Function
Enable/Disable SEP
polling
Terminal properties
[ALT][T]
Connect
Hang Up
There is also a drop-down box that allows you to select the active serial device from among those
available. This box includes the option to use the Terminal Window as a 'dumb terminal' if necessary
(also accessible by pressing [ALT][Down arrow] then release [ALT]).
DPN 402196 Issue 4.1
Figure 5-8, allows you to send and view data to and from the SEP and
Explanation
This button has a toggle action that pauses and resumes SEP polling with
alternate presses. With this button deselected, DeepView does not send the
necessary characters that request data packets from the SEP.
Use this button to set the serial communication parameters for the active
serial device.
This button allows you to connect the terminal to the active serial device.
This button allows you to disconnect the terminal from the active serial
device.
© Teledyne TSS
5 – Operating Software
5- 19