Table of Contents
Advertisement
1-4
AUX Cable
The AUX cable is optional. This cable enables the connection of headphones,
external DC power and a transmit sync output.
Accessories Case
The accessories case contains the transducer, the transducer cable, the AC
power cable, and the optional AUX cable. This manual is also included in the
case for the rack mount configuration of the deck box only.
Operation
A touch screen display on the front panel of the deck box enables local control
of all the deck box functions and the display of status and data. The deck box
can also be operated remotely from as many as two computers.
Power Requirements
The UDB-9000 is powered externally from 85–264 VAC, 47–63 Hz at
50 watts typical. The portable configuration of the deck box can also be
powered from its two internal rechargeable batteries. Optionally, external
10–30 VDC power can be used to power both the portable and rack mount
configurations.
A minimum 12 VDC is required to charge the batteries. Conversion to internal
power is automatic when external power is removed, and the batteries
recharge automatically when external power is connected. In addition, the
deck box can be operated while the batteries are being charged.
External Connections
The UDB-9000 provides for the connection of external components, which
include the transducer, headphones and one or two PCs. Connections for
additional inputs and outputs are also provided, where one output functions
as a transmit sync for triggering an external transmitter. The inputs and the
other outputs are available for future expansion. The PC connections allow
commands and data to be sent and received.
WARNING Do not operate the UDB-9000 to range or send commands
without a transducer connected as the deck box could be damaged.
User's Manual
TELEDYNE BENTHOS
P/N M-270-10, Rev. B
Advertisement
Table of Contents
