Power Up - Teledyne T3PM1100 User Manual

Find Quality Products Online at:

Power Up

1. Ensure the AC voltage is 100~ 240V.
Steps
2. Connect the power
cord to the AC
voltage input.
Make sure the ground connector on the power
Note
cord is connected to a safety ground. This will
influence the measurement accuracy.
3. Push to turn on the main
power switch on the front
panel.
4. The display turns on and shows the last
function that was used before the power was
reset.
GlobalTestSupply
www.
GETTING STARTED
23
.com
sales@GlobalTestSupply.com