Teledyne API - T100 UV Fluorescence SO
7.3.
APICOM REMOTE CONTROL PROGRAM
06807F DCN7335
Analyzer
2
APICOM is an easy-to-use, yet powerful interface program that allows a user to access
and control any of Teledyne API's main line of ambient and stack gas instruments from
a remote connection through direct cable, modem, or Ethernet. Running APICOM, a
user can:
•
Establish a link from a remote location to the T100 through direct cable connection
via RS-232 modem or Ethernet.
•
View the instrument's front panel and remotely access all functions that could be
accessed when standing in front of the instrument.
•
Remotely edit system parameters and set points.
•
Download, view, graph and save data for predictive diagnostics or data analysis.
•
Retrieve, view, edit, save and upload DAS configurations (Section 7.4).
•
Check on system parameters for trouble-shooting and quality control.
APICOM is very helpful for initial setup, data analysis, maintenance and
troubleshooting. Figure 7-15 shows an example of APICOM being used to remotely
configuration the DAS feature. Figure 7-13 shows examples of APICOM's main
interface, which emulates the look and functionality of the instrument's actual front
panel:
Figure 7-13:
APICOM is included with the analyzer and the latest versions can also be downloaded at
no charge at http://www.teledyne-api.com/software/apicom/.
Data Acquisition System (DAS) and APICOM
APICOM Remote Control Program Interface
165