Remote Das Configuration; Das Configuration Via Apicom; Figure 7-2: Apicom Remote Control Program Interface - Teledyne T200 Operation Manual

Data Acquisition System (DAS) and APICOM

7.2. REMOTE DAS CONFIGURATION

7.2.1. DAS CONFIGURATION VIA APICOM

166
Teledyne API – T200 NO/NO
The DAS can be configured and operated remotely via either the APICOM interface or a
terminal emulation program. Once a DAS configuration is edited (which can be done
offline and without interrupting DAS data collection), it is conveniently uploaded to the
instrument and can be stored on a computer for later review, alteration or documentation
and archival.
Table 7-2 shows examples of APICOM‟s main interface, which emulates the look and
functionality of the instrument‟s actual front panel. Figure 7-3 shows an example of
APICOM being used to remotely configure the DAS feature.
The APICOM user manual (Teledyne API‟s P/N 039450000) is included in the
APICOM installation file, which can be downloaded at http://www.teledyne-
api.com/software/apicom/.
Figure 7-2:
/NO
2
APICOM Remote Control Program Interface
Analyzer Operation Manual
X
06858E DCN7057