Rear Fender - Honda Shadow TA200 2001 Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
REMOVAL/INSTALLATION
NOTE:
Be careful not to pinch the wire harness between lhe rear
fender and the frame.
Remove the seat (page 2-2).
REAR GRIP
I
REAR FENDER
-----=---/
Disconnect the tail/brake l i ght and license l i ght connectors.
Remove the bolts, right and l e ft side rails.
Remove the bolts and rear grip.
Remove the bolt, wire cramp and rear tender assembly from
the frame.
Remove the nuts, collars, clamp and tail/brake light assem-
bly from the rear fender.
Remove the rear fender from the sub-frame.
Remove the bolts and l i cense light assembly from the sub-
frame.
Installation i s in the reverse order of removal.
2-4
RIGHT SIDE RAIL
REAR FENDER
\
SUB FLAME
LEFT SIDE RAIL
WIRE CLAMP
TAIUBRAKE LIGHT
ASSEMBLY
I
0
LICENSE LIGHT
ASSEMBLY