FRAMEIBODY PANELSIEXHAUST SYSTEM
DISASSEMBLYIASSEMBLY
REAR FENDER A
Open the saddle bag using the ignition key (page 3-
5).
Remove the socket bolts and rubber washers.
Loosen the saddle bag socket bolts, then make sure
the clearance.
Release the bosses from the grommets being care-
ful not to damage the tab, then remove the rear
fender A.
Remove the license light bulb socket from the rear
fender A (page 22-6).
Installation is in the reverse order of removal.
SOCKET BOLTIRUBBER WASHERS
BOSSES
\
REAR FENDER A