Rev. 09/2002
3.20 HARD DISK/CONTROLLER
BOARD
1. Left rear corner cover (
2. Expansion spacer [A] (
3. Controller board [B] (
NOTE: Use the wire handle to slide the
HDD out of the expansion box.
⇒
4. Remove the NVRAM from the old
Controller Board and install it on the new
board.
5. HDD unit bracket [C] (
6. HDD unit [D] (
NOTE: Work carefully to avoid
dropping or hitting the HDD.
SM
3.8.1)
x2)
x2)
x3,
x2)
x4)
3-73
HARD DISK/CONTROLLER BOARD
[B]
B003/B004/B006/B007
[A]
B004R104.WMF
[D]
[C]
B004R971.WMF