Vlan Show Commands; Show Vlan; Show Vlan <Vlan_Id - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

6.2 VLAN Show Commands

This section describes the commands you use to view VLAN settings.

6.2.1 show vlan

This command displays a list of all configured VLANs.
Format
Modes
VLAN ID
VLAN Name
VLAN Type
6.2.2 show vlan <vlan_id>
This command displays detailed information, including interface information, for a
specific VLAN. The ID is a valid VLAN identification number.
Format
Modes
VLAN ID
VLAN Name
VLAN Type
VLAN Commands
show vlan
Privileged EXEC
User EXEC
There is a VLAN Identifier (vlanid) associated with each
VLAN. The range of the VLAN ID is 1 to 4093.
A string associated with this VLAN as a convenience. It can
be up to 32 alphanumeric characters long, including blanks.
The default is blank. VLAN ID 1 always has a name of
"Default." This field is optional.
Type of VLAN, which can be Default (VLAN ID = 1) or
static (one that is configured and permanently defined), or a
Dynamic (one that is created by GVRP registration).
show vlan <vlanid>
Privileged EXEC
User EXEC
There is a VLAN Identifier (VID) associated with each
VLAN. The range of the VLAN ID is 1 to 4093.
A string associated with this VLAN as a convenience. It can
be up to 32 alphanumeric characters long, including blanks.
The default is blank. VLAN ID 1 always has a name of
"Default." This field is optional.
Type of VLAN, which can be Default (VLAN ID = 1) or
static (one that is configured and permanently defined), or
Dynamic (one that is created by GVRP registration).
v1.0, October 2008
6-11