Enable The Voice Vlan Mode For Ports - NETGEAR GS110EMX User Manual

8-Port Gigabit Ethernet Plus Switch with 2-Port 10G/Multi-Gig Uplinks GS110EMX
You can select either the default VLAN ID (1) or a VLAN ID that you manually added
(see Create 802.1Q-based VLANs in a basic configuration on page 30 or Create
802.1Q-based VLANs in an advanced configuration on page 31).
7. In the Class of Service menu, select the class value for the voice VLAN.
You can select a value from 0 (the lowest priority) to 7 (the highest priority). The
default CoS value is 6.
8. Click the Apply button.
Your settings are saved.

Enable the voice VLAN mode for ports

You can enable the voice VLAN mode for individual ports so that these ports become
members of the voice VLAN. By default, the voice VLAN mode is disabled for all ports.
To enable the voice VLAN mode for one or more ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN > Voice VLAN > Port Settings.
The OUI Port Settings page displays.
6. Select one or more ports.
7. In the Voice VLAN Mode menu, select Enable.
By default, the voice VLAN mode is disabled for all ports.
8. Click the Apply button.
Your settings are saved.
Use VLANS for Traffic
Segmentation
36 User Manual