Switchport Mode Private-Vlan - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches
Term
host-association
mapping
primary-vlan-id
secondary-vlan-id
add
remove
secondary-vlan-list
no switchport private-vlan
This command is used to remove the private-VLAN association or mapping from the port.
Format
no switchport private-vlan {host-association | mapping}
Mode Interface Config

switchport mode private-vlan

This command is used to configure a port as a promiscuous or host private VLAN port. Note that
the properties of each mode can be configured even when the switch is not in that mode.
However, they will only be applicable once the switch is in that particular mode.
Format
switchport mode private-vlan {host | promiscuous}
Mode Interface Config
Default General
Term Definition
host Configures an interface as a private VLAN host port. It can be either isolated or community
port depending on the secondary VLAN it is associated with.
promiscuous Configures an interface as a private VLAN promiscuous port. The promiscuous ports are
members of the primary VLAN.
no switchport mode
This command is used to remove the private-VLAN association or mapping from the port.
Format
no switchport mode private-vlan
Mode Interface Config
Definition
Defines VLAN association for community or host ports.
Defines the private VLAN mapping for promiscuous ports.
Primary VLAN ID of a private VLAN.
Secondary (isolated or community) VLAN ID of a private VLAN.
Associates the secondary VLAN with the primary one.
Deletes the secondary VLANs from the primary VLAN association.
A list of secondary VLANs to be mapped to a primary VLAN.
Security Commands
284