Protected Ports - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Select the Convert Dynamic Address to Static check box.
3. Click APPLY.
The dynamic MAC Address entries are converted to static MAC address entries in a
numerically ascending order until the static limit is reached.
The Dynamic MAC Addresses Table section shows the MAC addresses and their associated
VLANs learned on the selected port. Use the Port List menu to select the port for which you
want to display data.
Table 26 describes the dynamic MAC addresses table fields.
Table 26. Dynamic MAC addresses table fields.
Field
VLAN ID
MAC Address

Protected Ports

If a port is configured as protected, it does not forward traffic to any other protected port on
the switch, but it forwards traffic to unprotected ports. Use the Protected Ports screen to
configure the ports as protected or unprotected.
To configure protected ports:

1. Select Security
Description
The VLAN ID corresponding to the last violation MAC address.
The MAC addresses learned on a specific port.
Traffic Control Protected Ports.
 
Managing Device Security
186