Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
3.6.10 ip http secure-session maxsessions
This command limits the number of secure HTTP sessions. Zero is the configurable
minimum.
Default
Format
Mode
3.6.10.1 no ip http secure-session maxsessions
Restores the the number of allowable secure HTTP sessions to the default value.
Format
Mode
3.6.11 ip http secure-session soft-timeout
Configures the soft timeout for secure HTTP sessions in minutes. When this timeout
expires the user will be forced to re-authenticate. This timer begins on initiation of the
Web session and is re-started with each access to the switch. The secure-session soft
timeout cannot be set to zero (infinite).
Default
Format
Mode
3.6.11.1 no ip http secure-session soft-timeout
Resets the soft timeout for secure HTTP sessions to the default value.
Format
Mode
3.6.12 network javamode
This command specifies whether or not the switch should allow access to the Java applet
in the header frame of the Web interface. When access is enabled, the Java applet can be
viewed from the Web interface. When access is disabled, the user cannot view the Java
applet.
Default
Format
3-20
16
ip http secure-session maxsessions <0-16>
Privileged EXEC
no ip http secure-session maxsessions
Privileged EXEC
60
ip http secure-session soft-timeout <1-60>
Privileged EXEC
no ip http secure-session soft-timeout
Privileged EXEC
enabled
network javamode
v1.0, October 2008
Administrative Access Commands