Logging Commands; Show Terminal Length; Logging Buffered - NETGEAR GSM7228PS Cli Manual

no terminal length
Use this command to set the terminal length to the default value.
Format
no terminal length
Mode Privileged EXEC

show terminal length

Use this command to display the value of the user-configured terminal length size.
Format
show terminal length
Mode Privileged EXEC

Logging Commands

This section describes the commands you use to configure system logging, and to view logs and
the logging settings.

logging buffered

This command enables logging to an in-memory log that keeps up to 128 logs.
Default disabled; critical when enabled
Format
logging buffered
Mode Global Config
no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode Global Config
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-18