Terminal Length; Show Sysinfo - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

18.1.11 terminal length

This command controls the number of lines to be displayed when running the
running-config
Format
Mode
18.1.11.1 terminal no length
This command resets the number of lines displayed when running the
command to the default value (18).
config
Format
Mode

18.1.12 show sysinfo

This command displays switch information.
Format
Mode
Switch
Description
System Name
System Location
System Contact
System ObjectID
System Up Time
MIBs Supported
System Maintenance Commands
command.
terminal length
Privileged EXEC
terminal no length
Privileged EXEC
show sysinfo
Privileged EXEC
Text used to identify this switch.
Name used to identify the switch.The factory default is blank.
To configure the system name, see
server" on page
Text used to identify the location of the switch. The factory
default is blank. To configure the system location, see
10.1.1 "snmp-server" on page
Text used to identify a contact person for this switch. The fac-
tory default is blank. To configure the system location, see
Section 10.1.1 "snmp-server" on page
The base object ID for the switch's enterprise MIB.
The time in days, hours and minutes since the last switch
reboot.
A list of MIBs supported by this agent.
v3.0, January 2008
<1-24>
Section 10.1.1 "snmp-
10-1.
10-1.
show
show running-
Section
10-1.
18-17