Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
VLAN ID
Note: This command only applies to GSM7300S series models.
6.1.1.1 no vlan association mac
This command removes the association of a MAC address to a VLAN.
Format
Mode
Association options are the same as for the
above.
Note: This command only applies to GSM7300S series models.
6.1.2 vlan database
This command gives you access to the VLAN Config mode, which allows you to
configure VLAN characteristics.
Format
Mode
6.1.3 network mgmt_vlan
This command configures the Management VLAN ID.
Default
Format
Mode
6.1.3.1 no network mgmt_vlan
This command sets the Management VLAN ID to the default.
6-2
imal numbers that are separated by colons, for example
01:23:45:67:89:AB.
A VLAN Identifier (VID) is associated with each VLAN.
no vlan association mac <macaddr> <vlanid>
VLAN Config
vlan association mac
vlan database
Privileged EXEC
1
network mgmt_vlan <1-4069>
Privileged EXEC
v3.0, January 2008
command, described
VLAN Commands