Vlan Commands; Vlan Configuration Commands; Vlan Database - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

This section describes the VLAN commands available in the 7300 Series Managed Switch
CLI. VLANs allow users located on different physical networks to be on the same logical
network.
The VLAN Commands section includes the following topics:
• Section 6.1 "VLAN Configuration Commands" on page 6-1
• Section 6.2 "VLAN Show Commands" on page 6-11
• Section 6.3 "Provisioning (IEEE 802.1p) Commands" on page 6-14
The commands in this section are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.

6.1 VLAN Configuration Commands

This section describes the commands you use to configure VLAN settings.

6.1.1 vlan database

This command gives you access to the VLAN Config mode, which allows you to
configure VLAN characteristics.
Format
Mode

VLAN Commands

vlan database
Privileged EXEC
v1.0, December 2005
Chapter 6
VLAN Commands
6-1