Show Ip Igmp-Proxy Interface - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Older Version 1 The interval used to timeout the older version 1 queriers.
Querier Timeout
Older Version 2 The interval used to timeout the older version 2 queriers.
Querier Timeout
Proxy Start The number of times the IGMP Proxy has been stopped and started.
Frequency
Example: The following shows example CLI display output for the command.
(Switch) #show ip igmp-proxy
Interface Index............................................. 1/0/1
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ 5.5.5.50
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 00::00:00
Proxy Start Frequency................................. 1

show ip igmp-proxy interface

This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
Format
show ip igmp-proxy interface
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Index The unit/slot/port of the IGMP proxy.
The column headings of the table associated with the interface are as follows:
Term Definition
Ver The IGMP version.
Query Rcvd Number of IGMP queries received.
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-37