Bootpdhcprelay Maxhopcount; Bootpdhcprelay Minwaittime; Show Bootpdhcprelay - NETGEAR M6100 Series Reference Manual

bootpdhcprelay maxhopcount

This command configures the maximum allowable relay agent hops for BootP/DHCP Relay
on the system. The hops parameter has a range of 1 to 16.
Default 4
Format
bootpdhcprelay maxhopcount hops
Mode Global Config
no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/DHCP
Relay on the system.
Format
no bootpdhcprelay maxhopcount
Mode Global Config

bootpdhcprelay minwaittime

This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BootP relay agent receives a BOOTREQUEST message, it can use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to
relay the request or not. The minwaittime seconds parameter has a range of 0 to 100
seconds.
Default 0
Format
bootpdhcprelay minwaittime seconds
Mode Global Config
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay
on the system.
Format
no bootpdhcprelay minwaittime
Mode Global Config

show bootpdhcprelay

This command displays the BootP/DHCP Relay information.
Format
show bootpdhcprelay
Modes Privileged EXEC
User EXEC
M6100 Series Switches
Routing Commands
693