Router Discovery Protocol Commands; Show Ip Stats; Ip Irdp; Ip Irdp Multicast - NETGEAR ProSafe GSM7224P User Manual

show ip stats

This command displays IP statistical information. Refer to RFC 1213 for more information
about the fields that are displayed.
Format
show ip stats
Modes
• Privileged EXEC
• User EXEC

Router Discovery Protocol Commands

This section describes the commands you use to view and configure Router Discovery
Protocol settings on the switch. The Router Discovery Protocol enables a host to discover the
IP address of routers on the subnet.

ip irdp

This command enables Router Discovery on an interface.
Default
disabled
Format
ip irdp
Mode
Interface Config
no ip irdp
This command disables Router Discovery on an interface.
Format
no ip irdp
Mode
Interface Config

ip irdp multicast

This command configures the address that the interface uses to send the router discovery
advertisements. The address is 224.0.0.1, which is the all-hosts IP multicast address.
Default
224.0.0.1
Format
ip irdp multicast
Mode
Interface Config
ProSafe Managed Switch
Routing Commands
250