Arp Cachesize; Arp Dynamicrenew; Arp Purge; Arp Resptime - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.1.3 arp cachesize

This command configures the ARP cache size. The value for
specific integer value.
Format
Mode
14.1.3.1 no arp cachesize
This command configures the default ARP cache size.
Format
Mode

14.1.4 arp dynamicrenew

This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Format
Mode
14.1.4.1 no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format
Mode

14.1.5 arp purge

This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format
Mode

14.1.6 arp resptime

This command configures the ARP request response timeout. The value for
a valid positive integer, which represents the IP ARP entry response timeout time in
seconds. The range for
Routing Commands
arp cachesize <Platform specific integer value>
Global Config
no arp cachesize
Global Config
arp dynamicrenew
Privileged EXEC
no arp dynamicrenew
Privileged EXEC
arp purge <ipaddr>
Privileged EXEC
is between 1-10 seconds.
<seconds>
v1.0, December 2005
is a platform
<cachesize>
<seconds>
is
14-3