Arp Cachesize; Arp Dynamicrenew - NETGEAR ProSafe GSM7228PS Cli Manual

arp cachesize

This command configures the ARP cache size. The ARP cache size value is a platform specific
integer value. The default size also varies depending on the platform.
Format
arp cachesize <platform specific integer value>
Mode Global Config
no arp cachesize
This command configures the default ARP cache size.
Format
no arp cachesize
Mode Global Config

arp dynamicrenew

This command enables the ARP component to automatically renew dynamic ARP entries when
they age out.
Default enabled
Format
arp dynamicrenew
Mode Privileged EXEC
no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format
no arp dynamicrenew
Mode Privileged EXEC
Routing Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
4-3