Show Igmpsnooping Mrouter Interface; Show Igmpsnooping Mrouter Vlan - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
When you specify a value for
VLAN Admin
Mode

16.2.2 show igmpsnooping mrouter interface

This command displays information about statically configured ports.
Format
Mode
Interface
Multicast Router
Attached
VLAN ID

16.2.3 show igmpsnooping mrouter vlan

This command displays information about statically configured ports.
Format
Mode
Interface
VLAN ID
16-8
, the following additional information appears:
<vlanid>
Indicates whether IGMP Snooping is active on the VLAN.
show igmpsnooping mrouter interface <slot/port>
Privileged EXEC
Shows the port on which multicast router information is
being displayed.
Indicates whether multicast router is statically enabled on the
interface.
Displays the list of VLANs of which the interface is a mem-
ber.
show igmpsnooping mrouter vlan <slot/port>
Privileged EXEC
Shows the port on which multicast router information is
being displayed.
Displays the list of VLANs of which the interface is a mem-
ber.
v1.0, December 2005
IGMP Snooping Commands