Avaya S8700 Maintenance Manual page 655

Avaya s8700 media server for ip connect configurations

Hide thumbs Also See for S8700:

Table of Contents

MO's Name (in

Where UU is the universal cabinet number (1–64); C is the carrier designation (A, B, C, or D); SS is the address

of the slot in the carrier where the circuit pack resides (01–10); and pp is the 2-digit port number (01, 02, 03, ...).

Each Voice Conditioner circuit pack (VC-BD) provides two types of resources:

1. Transcoder Resources used for encoding and decoding audio formats

2. Summer Resources used for summing audio from different sources

The eight Voice Conditioner DSP ports are the transcoder resources on the

Error Log Entries and Test to Clear Values

Table 8-560. VC-DSPPT Error Log Entries

Associated Test

busyout port UUCSSpp

NPE Crosstalk test (#6)

VC DSP Port Local TDM

Loopback test (#1104)

VC Port Reset DSP test

VC DSP Port DSP

Loopback test (#1105)

Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate

test's description, and follow its recommended procedures.

Initial Command to Run

test port UUCSSpp

Full Name of MO

Voice Conditioner DSP Port

Test to Clear Value

test port UUCSSpp sh r 1

release port UUCSSpp

test port UUCSSpp 1 r 3

test port UUCSSpp sh r 3

See note (d)

test port UUCSSpp sh r 3

Issue 1 May 2002

Chapters

Table of Contents