Avaya S8700 Maintenance Manual page 166

Maintenance Object Repair Procedure
Table 8-366. Test #7 Conference Circuit Test — Continued
Error Test
Code Result Description / Recommendation
1020 ABORT The test did not run due to an already existing error on the specific port or due
to a more general error on the circuit pack.
1. Examine the error log for existing errors against this port or the circuit pack
2000 ABORT The test was aborted because response to the test was not received within the
allowable time period.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test aborts with error code 2000 again, run short test sequence on
2100 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
8-862 Issue 1 May 2002
and attempt to diagnose the already existing error. (Error code 1793
indicates a problem with the DS1 interface board, and any problems on the
associated DS1-BD or UDS1-BD should be resolved first.)
the associated DS1-BD or UDS1-BD. If tests 138 through 145 on the
associated DS1-BD or UDS1-BD are also aborting with error code 2000,
hyperactivity on the board or facility is indicated. In this case, the
hyperactivity problem should be dealt with first.
Continued on next page
555-233-142