Avaya S8700 Maintenance Manual page 61

Avaya s8700 media server for ip connect configurations

Hide thumbs Also See for S8700:

Table of Contents

MEDPROPT (TN802/TN2302 MED PRO DSP PORT)

System Technician-Demanded Tests:

Descriptions and Error Codes

Investigate tests in the order they are presented in

clearing error codes associated with the DSP Capacity Query test (#1382), you

may also clear errors generated from the other tests in the testing sequence.

Table 8-323. System Technician-Demanded Tests

Order of Investigation

DSP Capacity Query (#1382)

TDM NIC Loop-around test (#1380)

Port Status test (#1407)

D = Destructive; ND = Nondestructive

DSP Capacity Query Test (#1382)

This test is nondestructive

For the TN802B

When using theTN802B, this test polls the circuit pack for the number of failed

DSPs. If every DSP is functional, the test passes and the board is operating at

maximum capacity. If any DSPs have failed, the test fails and reports the number

of failed DSPs.

A failure of 3 or fewer DSPs does not result in an alarm. A failure of more than 3

and up to 8 DSPs results in a warning alarm. A failure of more than 8 DSPs

results in a minor alarm. In all cases, except when every DSP fails, the

MEDPROPT continues to provide reduced capacity.

For the TN2302

When using the TN2302 this test polls the circuit pack for the state of health of a

specific DSP. If the DSP is bad, an error will be logged and the board will be

polled again. If the circuit pack is still failing, the DSP will be taken out of service

and a MINOR alarm will be raised.

8-323. For example, by

Issue 1 May 2002

Chapters

Table of Contents