Avaya S8700 Maintenance Manual page 452

Maintenance Object Repair Procedure
This second part of this test cannot be run on a trunk if one of the following cases
is true:
1. The trunk direction is administered as an incoming only trunk.
2. The trunk is the 24
administered using 24
3. The trunk has been seized by a normal trunk call.
4. The trunk is administered with maintenance test disabled.
5. The outgoing signal type of the trunk is either automatic or immediate-start.
6. This test always passes if the associated board is the TN802 IP trunk
circuit pack.
8-1148 Issue 1 May 2002
th
port on a DS1 Interface circuit pack which is
th
common-channel signaling.
555-233-142