Tone-Bd (Tone-Clock Circuit Pack) - Avaya S8700 Maintenance Manual

Avaya s8700 media server for ip connect configurations

Hide thumbs Also See for S8700:

Table of Contents

TONE-BD (Tone-Clock Circuit Pack)

MO's Name (in

UU is the universal cabinet number (1–64). C is the carrier designation (A, B, C, or D).

The TONE-BD MO supports EPNs in an S8700 Media Server system using a

TN2312 IP Server Interface (IPSI) circuit pack

The TONE-BD MO consists of a module located on the IPSI circuit pack and

provides tone generation, tone detection, call classification, clock generation, and

synchronization.

The TN2312 IPSI circuit pack contains two independent components:

Tone Generator that provides every tone needed by the system

Clock that generates the system clocks for both the Time Division Multiplex

(TDM) bus and the packet (LAN) bus

It also aids in monitoring and selecting internal synchronization references.

When resolving an IPSI circuit pack's errors/alarms, the following sections should

also be consulted:

Use the set ipserver-interface command to establish the tone and

synchronization resources for the system.

TONE-PT (Tone Generator)

TDM-CLK (TDM Bus Clock)

SYNC (Synchronization)

PKTINT (IPSI only)

If more tone-detection resources are needed, the additional resources must be

provided by TN748, TN420, or TN744 circuit packs.

Initial Command to Run

test tone-clock UUC short

release tone-clock UUC

Full Name of MO

Tone-Clock circuit pack

Issue 1 May 2002

Table of Contents