Avaya S8700 Maintenance Manual page 23

MAPD-BD (MAPD Interface Circuit Pack TN802)
Table 8-296
servicing an IP Trunk.
Table 8-296. TN802 LCD messages for IP trunks
Display
PC BOOT
IP TRK #
IML DWN #
MSHUT #, where both
MSHUT and # are
blinking
MSHUT #, where # is
blinking
Support for Laptop PCs
Field technicians can access the TN802 circuit pack through:
1. ''pcANYWHERE® Client Software''
2. ''Directly-Connected Keyboard, Monitor, Mouse''
®
Client Software
pcANYWHERE
1. Attach a male-to-male serial cable and a NULL modem connector (if
2. Launch the pcANYWHERE
3. Click on Add Remote Control Item.
4. In the Properties window, choose the communication port to which
5. Click on Details and configure the settings
555-233-142
lists the TN802 LCD messages that you might see if installing or
Explanation
The TN802 MAPD PC is booting up.
IP Trunk application is running (# character blinks).
Internal error on the IP Trunk. System shuts down and
sends and error message to the board.
The system is in the process of shutting down due to a front
panel button press. Do not attempt to remove board.
The system has shut down gracefully.
not built into the cable you use) to the COM2 connector (Note 8 in
Figure 8-16 on page 8-720) Attach the other end to the serial port of
your laptop.
you connected the cable in Step 1.
Continued on next page
®
application.
(Table 8-297):
Issue 1 May 2002 8-719