Avaya S8700 Maintenance Manual page 180

Maintenance Object Repair Procedure
Error Log Entries and Test to Clear Values
Table 8-371. PDATA Port Error Log Entries
Error Aux
Type Data Associated Test
2
0 Any
1 (a) LAP-D Connectivity test
(#558)
18 Busy Port
130 (b) None
257 (c)
513 (c)
779 (c)
1025 (d) Translation RAM Update
1281 (e)
1793 (f) Port Local Loop-Around
test (#602)
2049 (g) System Port Connectivity
test (#603)
3842* 37914
3843*
3844*
1. Major or Minor alarms on this MO may have been downgraded to Warning alarms based on the values used in
the set options command.
2. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
Notes:
a. This error occurs if the LAP-D Connectivity test fails. If this test fails
repeatedly, a MINOR alarm is raised. This alarm indicates the failure to
establish a LAP-D link with the port and to send and receive test data over
that port. See the repair procedure for LAP-D Connectivity test (#558).
b. This error type indicates that the circuit pack has been removed or has
been insane for more than 11 minutes. To clear the error, reinsert or
replace the circuit pack.
8-876 Issue 1 May 2002
Alarm On/Off
1
Level Board Test to Clear Value
Any Any test port UUCSSpp sh r 1
MINOR ON test port UUCSSpp r 3
WARNING OFF release port UUCSSpp
WARNING ON test port UUCSSpp sh
MINOR ON see footnote (c)
MINOR ON test port UUCSSpp
MINOR OFF test port UUCSSpp
test port UUCSSpp sh l
555-233-142