Avaya S8700 Maintenance Manual page 177

PDATA-PT (Packet Data Line Port)
Table 8-369. Data Application Commands
Application Name
Announcement circuit
pack
CDR
Wakeup Log printer for
the PMS Journal printer
for the PMS
System printer
Data terminals
Remote G3-MT terminals
System Port Wiring Scheme
If you find that you are having trouble with a PDATA port and you do not know
which extensions are being affected or which Data Line port is attached, enter
display port UUCSSpp with the PDATA port number to display the extension of
the System Port. With this extension you can run display data-module ext,
which will in turn identify the Data Line port. The PDATA and Data Line ports are
wired together in a manner similar to a null-modem. The figure below illustrates
the wiring scheme for the EIA ports. The subsequent table gives the full wiring
sequence for eight Data Line ports attached to eight PDATA ports.
DAT-LINE
(TN726B)
Figure 8-30. System Port Wiring Scheme
555-233-142
Application Command to Display
MO's Name Link Status
Not applicable Not Applicable
CDR-LNK status cdr-link
JRNL-LNK status journal-link
wakeup-log
SYS-PRNT status sp-link
Not applicable status data-module ext
Not applicable status data-module ext
TXT
TXR
PXT
Port
PXR
Command to Locate the
Extension
display announcements
display sys-param cdr
display system-parameters
hospitality
display system-parameters
features
list data-module
list data-module
TXT
PDATA
TXR
(TN553)
PXT
Port
PXR
Issue 1 May 2002 8-873