Basic Operation Procedure (Pu Operation) - Mitsubishi Electric FR-F800 Series Instruction Manual

4.5

Basic operation procedure (PU operation)

Select a method to give the frequency command from the list below, and refer to the specified page for its procedure.
Setting the frequency on the operation panel in the frequency setting mode
Give commands by turning the setting dial like a potentiometer
Give commands by turning ON/OFF switches wired to inverter's terminals (multi-speed setting)
Setting the frequency by inputting voltage signals
Setting the frequency by inputting current signals
122
4. BASIC OPERATION
4.5 Basic operation procedure (PU operation)
Downloaded from ManualsNet.com
Method to give the frequency command
search engine
Refer to page
123
124
125
126
127