Canon imagePRESS 1135 Series Service Manual page 1208

COPIER > OPTION > FEED-SW
DK5-REST Adj paper rest level in POD2 upper deck
Lv.1 Details Adjusting threshold for paper remaining level to be determined as "no
paper" in the upper deck of the secondary POD deck.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approximately 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-REST, DK2-REST, DK3-
REST, DK4-REST, DK6-REST, DK7-REST, DK8-REST, DK9-REST,
DK10REST
DK6-REST Adj paper rest level in POD2 middle deck
Lv.1 Details Adjusting threshold for paper remaining level to be determined as "no
paper" in the middle deck of the secondary POD deck.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approximately 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-REST, DK2-REST, DK3-
REST, DK4-REST, DK5-REST, DK7-REST, DK8-REST, DK9-REST,
DK10REST
DK7-REST Adj paper rest level in POD2 lower deck
Lv.1 Details Adjusting threshold for paper remaining level to be determined as "no
paper" in the lower deck of the secondary POD deck.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approximately 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-REST, DK2-REST, DK3-
REST, DK4-REST, DK5-REST, DK6-REST, DK8-REST, DK9-REST,
DK10REST
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
COPIER > OPTION > FEED-SW
DK8-REST Adj paper rest level in POD3 upper deck
Lv.1 Details Adjusting threshold for paper remaining level to be determined as
"no paper" in the upper deck of the (2nd/additional) secondary POD
deck 2.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approximately 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-REST, DK2-REST, DK3-
REST, DK4-REST, DK5-REST, DK6-REST, DK7-REST, DK9-REST,
DK10REST
DK9-REST Adj paper rest level in POD3 middle deck
Lv.1 Details Adjusting threshold for paper remaining level to be determined as
"no paper" in the middle deck of the (2nd/additional) secondary POD
deck 2.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approximately 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-REST, DK2-REST, DK3-
REST, DK4-REST, DK5-REST, DK6-REST, DK7-REST, DK8-REST,
DK10REST
INSRT-SW Set paper detection in inserter
Lv.1 Details Set whether to detect the paper presence in the multi inserter before
pickup start.
When "1" is set, a job starts before paper detection. Thus, the
insertion sheets tend to become jam paper when the paper runs out.
Use case When the productivity is low in case that the inserter is used.
Display/adj/set range 0 to 1
0: Pickup after paper detection, 1: Paper detection is not performed
Default value 1
8-265
8-265