Canon imagePRESS 1135 Series Service Manual page 1194

COPIER > OPTION > IMG-FIX
FIX-ENV2 Set of fixing mode: 209gThick PP or less
Lv.1 Details To set the fixing performance/productivity for thick paper (106 to 209
g/m2)..
When 0 is specified, auto mode is enabled.
From 1 to 3, as the smaller value is set, priority is given to
productivity and the greater value is set, priority is given to fixing
performance.
When 4 is specified, priority is given to productivity in case of 15 deg
C or more as well as setting value 1 (fixing mode 1) and priority is
given to fixing performance in case of less than 15 deg C as well as
setting value 3 (fixing mode 3).
Use case When changing the fixing performance or productivity during auto
control.
Adj/set/operate method Enter the setting value and press the OK key.
Display/adj/set range 0 to 4
0: Auto mode
1: Fixing mode 1
2: Fixing mode 2
3: Fixing mode 3
4: Fixing mode 1 in 15 deg C or more and fixing mode 3 in less than
15 deg C.
Default value 0
Related service mode COPIER> OPTION> IMG-FIX> FIX-ENV1, FIX-ENV3 to 5, FX-LVL01
to 10
FIX-ENV3 Set of fixing mode: 210gThick PP or more
Lv.1 Details To set the fixing performance/productivity for thick paper (210 to 300
g/m2).
When 0 is specified, auto mode is enabled.
From 1 to 3, as the smaller value is set, priority is given to
productivity and the greater value is set, priority is given to fixing
performance.
When 4 is specified, priority is given to productivity in case of 15 deg
C or more as well as setting value 1 (fixing mode 1) and priority is
given to fixing performance in case of less than 15 deg C as well as
setting value 3 (fixing mode 3).
Use case When changing the fixing performance or productivity during auto
control.
Adj/set/operate method Enter the setting value and press the OK key.
Display/adj/set range 0 to 4
0: Auto mode
1: Fixing mode 1
2: Fixing mode 2
3: Fixing mode 3
4: Fixing mode 1 in 15 deg C or more and fixing mode3 in less than
15 deg C.
Default value 0
Related service mode COPIER> OPTION> IMG-FIX> FIX-ENV1 to 2, FIX-ENV4 to 5, FX-
LVL01 to 10
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > IMG-FIX
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > IMG-FIX
COPIER > OPTION > IMG-FIX
FIX-ENV4 Set of fixing mode: Coated/Special PP
Lv.1 Details To set the fixing performance/productivity for coated paper and
special paper excluding thin, plain and thick paper.
When 0 is specified, auto mode is enabled.
From 1 to 3, as the smaller value is set, priority is given to
productivity and the greater value is set, priority is given to fixing
performance.
When 4 is specified, priority is given to productivity in case of 15 deg
C or more as well as setting value 1 (fixing mode 1) and priority is
given to fixing performance in case of less than 15 deg C as well as
setting value 3 (fixing mode 3).
Use case When changing the fixing performance or productivity during auto
control.
Adj/set/operate method Enter the setting value and press the OK key.
Display/adj/set range 0 to 4
0: Auto mode
1: Fixing mode 1
2: Fixing mode 2
3: Fixing mode 3
4: Fixing mode 1 in 15 deg C or more and fixing mode3 in less than
15 deg C.
Default value 0
Related service mode COPIER> OPTION> IMG-FIX> FIX-ENV1 to 3, FIX-ENV5, FX-LVL01
to 10
FIX-ENV5 Set of fixing mode: Mixed media
Lv.1 Details To set the fixing performance/productivity in case of media mixed
mode.
When 0 is specified, auto mode is enabled.
From 1 to 3, as the smaller value is set, priority is given to
productivity and the greater value is set, priority is given to fixing
performance.
When 4 is specified, priority is given to productivity in case of 15 deg
C or more as well as setting value 1 (fixing mode 1) and priority is
given to fixing performance in case of less than 15 deg C as well as
setting value 3 (fixing mode 3).
Use case When changing the fixing performance or productivity during auto
control.
Adj/set/operate method Enter the setting value and press the OK key.
Display/adj/set range 0 to 4
0: Auto mode
1: Fixing mode 1
2: Fixing mode 2
3: Fixing mode 3
4: Fixing mode 1 in 15 deg C or more and fixing mode3 in less than
15 deg C.
Default value 0
Related service mode COPIER> OPTION> IMG-FIX> FIX-ENV1 to 4, FX-LVL01 to 10
8-251
8-251