Canon imagePRESS 1135 Series Service Manual page 962

COPIER> DISPLAY> VERSION
MEDIA-CA Ver dspl of Catalan media information
Lv.2 Details Displaying the version of media information in Catalan.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
IOCS Version display of BIOS
Lv.1 Details Displaying the BIOS version.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
SYSTEM Ver dspl of Linux kernel/tool/driver/file
Lv.1 Details Displaying the version of Linux kernel/tool/driver/file.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
ROOT Version display of ROOT
Lv.1 Details Displaying the ROOT version.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
FLASH Dspl of firmware ver of encryption board
Lv.2 Details Displaying the firmware version of the encryption board.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
DECK3 Dspl of ROM version of secondary deck 2
Lv.1 Details Displaying ROM version of the 2nd secondary (additional) POD
deck.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
TRIM Dspl of trimmer ROM version
Lv.1 Details Displaying ROM version of the trimmer.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
8
Service Mode > COPIER > DISPLAY (Status Display Mode) > VERSION
8 Service Mode > COPIER > DISPLAY (Status Display Mode) > VERSION
COPIER> DISPLAY> VERSION
TRIM2 Dspl of ROM version of 2-knife trimmer
Lv.1 Details Displaying ROM version of Two-knife trimmer.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
FOLD Dspl of ROM version of folding unit
Lv.1 Details Displaying ROM version of paper folding unit.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
INS Display of inserter ROM version
Lv.1 Details Displaying ROM version of the insertion unit.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
INS-IF ROM ver dspl of cover inserter relay PCB
Lv.1 Details Displaying ROM version of the cover sheet inserter relay PCB.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
PUNCH-IF ROM version display of interface unit
Lv.1 Details Displaying ROM version of the interface unit.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
S-LNG-JP Ver of service mode Japanese lang file
Lv.1 Details Displaying the version of Japanese language file in Service Mode.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
S-LNG-EN Ver of service mode English lang file
Lv.1 Details Displaying the version of English language file in Service Mode.
Check that the version is properly displayed.
Use case When upgrading the firmware
Adj/set/operate method Select the item
Display/adjust/set range 00.01 to 99.99
8-19
8-19