Canon imagePRESS 1135 Series Service Manual page 1242

COPIER > OPTION > USER
SNMP-COA SNMP access limit for insid com name:adm
Lv.2 Details Restricting SNMP access by the community name (administrator
right) that is kept inside.
This machine keeps the internal community name (administrator
right) other than the SNMP community name that is specified in User
Mode. And Canon-made utility software, such as NetSpot, uses this
community name.
Because of security concern, select 0/1 in the case to restrict SNMP
access with the internal community name.
Use case In the case of restricting SNMP access with the community name
(administrator right) that is kept inside.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: OFF, 1: Available for Read only, 2: Available for Read/Write
Default value 2
Related user mode Additional Settings> System Settings> Network Settings> SNMP
Settings
SNMP-COU SNMP access limit for insid com name:usr
Lv.2 Details Restricting SNMP access by the community name (user right) that is
kept inside.
This machine keeps the internal community name (user right) other
than the SNMP community name that is specified in User Mode. And
Canon-made utility software such as NetSpot uses this community
name.
Because of security concern, select 0/1 in the case to restrict SNMP
access with the internal community name.
Use case In the case of restricting SNMP access with the community name
(user right) that is kept inside.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: OFF, 1: Available for Read only, 2: Available for Read/Write
Default value 2
Related user mode Additional Settings> System Settings> Network Settings> SNMP
Settings
TAB-EXIT Unneeded tab paper auto ejection ON/OFF
Lv.1 Details To set whether to eject unneeded tab papers automatically at every
set.
By selecting 1, when inputting job which needs tab papers, escape
ejection is executed to tab papers not needed for the next job every
time a set is output.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
XYSZ-DSP Dspl/hide: non-standard size at no paper
Lv.1 Details When the paper runs out, specify whether to display the X-Y size
that is the non-standard paper (custom paper).
When 0 (hide) is specified and paper runs out, the screen only tells
that it is non-standard paper.
When 1 (mm display) or 2 (inch display) is set, vertical and horizontal
size are displayed for easy identification in case that non-standard
paper is loaded on multiple cassettes.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 3
0: Hide, 1: mm display, 2: inch display, 3: Not used
Default value 0
SCALL-SW Dspl/hide of repair request button
Lv.1 Details Setting whether to display/hide the repair-request button on the
control panel.
Use case In the case that the sales company supports service by the repair-
request button.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
Supplement/memo This mode is for future use and currently not used.
SCALLCMP Set of repair request complete notice
Lv.1 Details With this setting enabled, a notification of repair complete is sent to
UGW server to clear the repair-request status that is kept inside.
Use case Service technician uses this mode after completing repair.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
Default value 0
Supplement/memo This mode is for future use and currently not used.
8-299
8-299