Canon imagePRESS 1135 Series Service Manual page 1550

29) Install the controller cover.
31) Insert the host machine plate between the grounding plate of RHDD unit and the gasket. Move RHDD unit to the right and install it by aligning it with the screw hole of controller cover.
• 4 screws (binding w/ washer; M4X8)
• 3 screws (binding w/ washer; M3X6)
grounding plate
gasket
9
Installation > Removable Hard Disk Kit-AA1 > Installation procedure
30) Fix the iVDR unit HDD1 cable and the fan cable with the edge saddle of RHDD unit.
MEMO :
Locate the cable in the position where each core attached to
each cable is placed on the host machine side compared to
the edge saddle.
CAUTION :
Be careful not to press the 2 gaskets of RHDD unit by the host machine plate.
RHDD plate RHDD plate
gasket gasket
grounding grounding
plate plate
Host Host
Machine plate Machine plate
9 Installation > Removable Hard Disk Kit-AA1 > Installation procedure
edge saddle
F-9-278
M4
9-133
M3
x7
F-9-279
9-133