Canon imagePRESS 1135 Series Service Manual page 1253

■ ACC
COPIER> OPTION> ACC
COIN Set of accounting management
Lv.1 Details Setting of charging management method
Use case When a coin manager is installed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Following items are automatically specified when changing the value
to 3 (from 0 to 2). The change will not be turned back even if putting
back the value to 0 to 2 (from 3) once the mode has been changed.
• COPIER> OPTION> USER> CONTROL = 1
• COPIER> OPTION> NETWORK> DA-CNCT = 1
• COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-
FAX = 0
• Additional Functions> System Settings> Network Settings>
E-mail/IFAX> SMTP reception, POP = OFF
• Additional Functions> System Settings> Network Settings>
TCP/IP Settings> IPP Print Setup = ON
• Additional Functions> System Settings> TCP/IP Settings>
FTP Print Setup> Using FTP Print = OFF
Display/adj/set range 0 to 4
0: No charge
1: Charge with coin manager
2: Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself (as a single unit)
Default value 0
Related service mode COPIER> OPTION> USER> CONTROL
COPIER> OPTION> NETWORK> DA-CNCT
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
Related user mode Following items after Additional Functions> System Settings:
Network Settings> E-mail/IFAX> SMTP reception, POP
Network Settings> TCP/IP Settings> IPP Print Setup
Network Settings> TCP/IP Settings> FTP Print Setup> Using FTP
print
Supplement/memo Control card can be used with "no charge"
DA: Digital Accessory
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > ACC
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > ACC
COPIER> OPTION> ACC
CC-SPSW Support setting of control card I/F
Lv.2 Details Setting of support level for control card (CCIV/CCV) interface.
Give priority on speed in the case to keep processing performance of
printer engine.
Give priority on the control for the upper limit number of sheets in the
case to correctly stop output with limitation for the upper limit number
of sheets.
Use case Upon request from the user (in the case of connecting to the external
counter management system using the control card interface)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution With priority on speed, output cannot be correctly stopped using
limitation for the upper limit number of sheets.
With priority on the upper limit number of sheets, processing
performance of the printer engine can be dropped depending on
pickup location.
Display/adj/set range 0 to 1
0: No support, 1: Support (priority on speed)
Default value 0
UNIT-PRC Setting of coin manager currency unit
Lv.2 Details Setting of currency unit to be handled with coin manager
Use case When a coin manager is installed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 6
0: Yen, 1: Euro, 2: Pound, 3: Swiss Franc. 4: Dollar, 5: No currency
unit (no fractional unit), 6: No currency unit (with fractional unit)
Default value 0
TRM-CTR Dspl/hide of blade replace message: Trmmr
Lv.1 Details Switch to display/hide the blade replacement message of the trimmer
on the control panel.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
TRM-CTRH Dspl/hde of blade holder replac msg:Trmmr
Lv.1 Details Switch to display/hide the blade holder replacement message of the
trimmer on the control panel.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
8-310
8-310