Canon imagePRESS 1135 Series Service Manual page 1399

SORTER> OPTION
TRM-CNT Set of number of trim: Fore Edge Trimmer
Lv.1 Details To set the number of trimming by the Fore Edge Trimmer.
Use case When preferring to perform trimming precisely
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Productivity may decrease.
Default value 0
VFLD-MAX Set max No. of sheets for Saddle V-fold
Lv.1 Details To set the maximum number of sheets to be folded in V-shape in the
Saddle.
Use case Upon user's request (to increase the number of sheets to be folded
in V-shape in the Saddle)
Adj/set/operate method Enter the setting value and press OK key.
Caution If the setting value is larger than the default (upper limit on the
specification), Saddle V-fold failure may occur.
Display/adj/set range 1 to 16
Default value 5
THN-STK Set thin paper stacking method: Low Tray
Lv.1 Details To set the method for stacking thin papers on the Lower Tray.
When 1 is set, the method is changed from normal delivery to the
delivery method with which papers are delivered as a paper stack so
stacking condition improves.
Use case Upon user's request (to improve stacking condition of thin papers on
the Lower Tray)
Adj/set/operate method Select the item and press OK key.
Display/adj/set range 0 to 1
0: Normal delivery method,
1: Delivery method with which papers are delivered
Default value 0
8
Service Mode > SORTER > OPTION
T-8-114
8 Service Mode > SORTER > OPTION
8-456
8-456