Canon imagePRESS 1135 Series Service Manual page 1254

COPIER> OPTION> ACC
BND-CTR Dspl/hide of blade replace messge:P-Bindr
Lv.1 Details Switch to display/hide the blade replacement message of the perfect
binder on the control panel.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
BND-CTRH Dspl/hde of blade holdr replac msg:P-Bndr
Lv.1 Details Switch to display/hide the blade holder replacement message of the
perfect binder on the control panel.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
MIN-PRC Set of coin manager minimum price
Lv.1 Details Setting of minimum amount to be handled with coin manager.
Enter 10 when specifying 10 yen as the minimum amount to be
handled with the coin manager that supports Japanese Yen.
In the case to specify 1 to 4 (Euro/ Pound/ Swiss Franc/ Dollar) by
going through the following: COPIER> OPTION> ACC> UNIT-PRC,
entry is in fractional unit. Entry of 50 indicates 50 cents ($ 0.50).
Use case When a coin manager is installed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution This mode is enabled when selecting 4 for the following: COPIER>
OPTION> ACC> COIN.
Display/adj/set range 0 to 9999
Unit According to the setting value by the following: COPIER> OPTION>
ACC> UNIT-PRC.
Default value 10
Related service mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/memo As for charging amount, it causes an error if specifying the value that
is smaller than the minimum currency unit with Additional Functions
mode.
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > ACC
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > ACC
COPIER> OPTION> ACC
MAX-PRC Set of coin manager maxmum price
Lv.1 Details Setting of maximum amount to be handled with coin manager.
Enter 8800 when specifying 8800 yen as the maximum amount to be
handled with the coin manager that supports Japanese Yen.
In the case to specify 1 to 4 (Euro/ Pound/ Swiss Franc/ Dollar) by
going through the following: COPIER> OPTION> ACC> UNIT-PRC,
entry is in fractional unit. Entry of 50 indicates 50 cents ($ 0.50).
Use case When a coin manager is installed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution This mode is enabled when selecting 4 for the following: COPIER>
OPTION> ACC> COIN.
Display/adj/set range 0 to 9999
Unit According to the setting value by the following: COPIER> OPTION>
ACC> UNIT-PRC.
Default value 8800
Related service mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/memo As for charging amount, it causes an error if specifying the value that
is larger than the maximum currency unit with Additional Functions
mode.
MIC-TUN Manual adj of voice recognitn microphone
Lv.1 Details Manually adjust the sound receiving level (sensitivity) of connected
voice recognition microphone.
Microphone sensitivity is automatically tuned in user mode; however,
adjust it manually as necessary.
Use case Adjust it manually when the sensitivity of microphone is not
appropriate by auto tuning.
Display/adj/set range 0 to 255
Default value 128
Related user mode Additional function> System setting> Voice management setting>
Microphone tuning
SRV-UNT Set instl satus: Smll-cmptibl revrs unit
Lv.1 Details To specify the installation status of small size-compatible reverse
unit.
Since the small size-compatible reverse unit is not recognized
automatically, specify 1 (Equipped) when it is installed and specify 0
(Not equipped) when it is removed.
Adj/set/operate method 0 to 1
Display/adj/set range 0 to 1
0: Not equipped, 1: Equipped
Default value 0
8-311
T-8-75
8-311