Canon imagePRESS 1135 Series Service Manual page 1227

■ USER
COPIER > OPTION > USER
COPY-LIM Setting of upper limit for copy
Lv.1 Details Setting the upper limit value for copy.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key
2) Turn OFF and then ON the main power supply.
Display/adj/set range 1 to 9999
Default value 9999
SLEEP Setting of auto sleep function
Lv.1 Details ON/OFF setting for auto sleep function.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Supplement/memo Specify the time for shifting to sleep mode in User Mode (Timer
Settings> Auto Sleep Time)
SIZE-DET ON/OFF of original size detect function
Lv.2 Details ON/OFF setting for original size detection function.
Use case Upon request from the user (glare of the document lamp, etc)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
COUNTER1 Display of software counter 1
Lv.1 Details Displaying counter type for software counter 1 on the screen to
check counter status
Use case Upon request from the user/ dealer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Display only. No change is available.
Default value The value differs according to the location.
COUNTER2 Display of software counter 2
Lv.1 Details Displaying counter type for software counter 2 on the screen to
check counter status
Use case Upon request from the user/ dealer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 999
Default value The value differs according to the location.
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
COUNTER3 Display of software counter 3
Lv.1 Details Displaying counter type for software counter 3 on the screen to
check counter status
Use case Upon request from the user/ dealer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 999
Default value The value differs according to the location.
COUNTER4 Display of software counter 4
Lv.1 Details Displaying counter type for software counter 4 on the screen to
check counter status
Use case Upon request from the user/ dealer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 999
Default value The value differs according to the location.
COUNTER5 Display of software counter 5
Lv.1 Details Displaying counter type for software counter 5 on the screen to
check counter status
Use case Upon request from the user/ dealer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 999
Default value 0
COUNTER6 Display of software counter 6
Lv.1 Details Displaying counter type for software counter 6 on the screen to
check counter status
Use case Upon request from the user/ dealer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 999
Default value 0
DATE-DSP Setting of data/time display format
Lv.2 Details Setting date/time display style according to the country or region.
The order to display date, which is specified by going through the
following: System Settings> Date/Time Settings; followed by the
order to be printed in the report.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
Default value The value differs according to the location.
8-284
8-284