Canon imagePRESS 1135 Series Service Manual page 1177

COPIER > OPTION > FNC-SW
CARD-RNG Carf number setting (department number)
Lv.2 Details Setting the number of cards (departments) that can be used with the
card reader.
Use case When setting the number of cards (departments)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1000
Default value 1000
SJOB-CL Setting scan job canceling by logout
Lv.1 Details Setting to cancel scan job in operation by logout of the user.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution - The job in scanning operation cannot be canceled.
- Cancel by logout is kept in the log.
Display/adj/set range 0 to 1
0: Disable this mode, 1: Enable this mode (approve)
Default value 0
Supplement/memo Scan job: job after the scanning operation is complete (scanned job).
PT3-INEX Setting allow to use paper Type3 info
Lv.2 Details Setting whether the following function can use paper Type3*
information.
- Import/export by remote UI
- Device information distribution
- Import/export from iWEMC
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Disable, 1: Enable (allow)
Default value 0
Supplement/memo *Particular paper type such as "Canon white recycle paper EW-500"
or "Canon color laser copier paper", etc.
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FNC-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FNC-SW
COPIER > OPTION > FNC-SW
USB-RCNT Auto connect set at USB device disconnct
Lv.2 Details Setting to enable/disable automatic connection when the connection
with USB device is out.
With the setting to disable automatic connection, USB device cannot
be used if disconnecting and then connecting the USB device. To
enable connection again, the power needs to be turned OFF, and
then ON.
With the setting to enable automatic connection, connect again after
disconnecting, and then connect the USB device again.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution With the setting to enable automatic connection, disconnecting of 1
area makes automatic connection of the USB device if there is USB
hub.
Display/adj/set range 0 to 1
0: No automatic connection, 1: Automatic connection
Default value 0
UNLMTBND Supprot setting of 400 binders print job
Lv.1 Details Setting whether to support print job that exceeds 400 binders.
With the setting to support, the machine makes print by sharing
binders according to job attribution.
Select the setting NOT to support, if the user does not print job* with
large quantity of binders.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Automatic setting (when the print server is not connected: no
support, when the print server is connected: supported)
1: No support
Default value 0
Supplement/memo *: A job that requires finishing (such as stapling) in one job. Does not
apply in the case of executing finishing with multiple sets of output.
MIBCOUNT Scope range set of account counter MIB
Lv.2 Details Setting of the range for counter information that can be obtained as
MIB (Management Information Base).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: obtain the all charge counter, 1: obtain the displayed counter* only,
2: disable to obtain the all charge counter
*: counter specified by the following: COPIER> OPTION> USER>
COUNTER 1 to 6
Default value 0
Related service mode COPIER> OPTION> USER> COUNTER 1 to 6
8-234
8-234