Canon imagePRESS 1135 Series Service Manual page 1134

COPIER> ADJUST> HV-TR
TR-ENV5 Set envirnmnt for PPallot volt adj: set5
Lv.2 Details To set the environment (absolute moisture ratio) for setting 5.
Setting 5 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV5, TR-PPR5,
TR-DUP5. When this condition is true, paper allotted voltage that is
set at 2TR-TGT5 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR5, TR-DUP5, 2TR-TGT5
TR-ENV6 Set envirnmnt for PPallot volt adj: set6
Lv.2 Details To set the environment (absolute moisture ratio) for setting 6.
Setting 6 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV6, TR-PPR6,
TR-DUP6. When this condition is true, paper allotted voltage that is
set at 2TR-TGT6 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR6, TR-DUP6, 2TR-TGT6
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
3
or less
3
3
3
3
3
3
3
or less
3
3
3
3
3
3
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
COPIER> ADJUST> HV-TR
TR-ENV7 Set envirnmnt for PPallot volt adj: set7
Lv.2 Details To set the environment (absolute moisture ratio) for setting 7.
Setting 7 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV7, TR-PPR7,
TR-DUP7. When this condition is true, paper allotted voltage that is
set at 2TR-TGT7 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR7, TR-DUP7, 2TR-TGT7
TR-ENV8 Set envirnmnt for PPallot volt adj: set8
Lv.2 Details To set the environment (absolute moisture ratio) for setting 8.
Setting 8 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV8, TR-PPR8,
TR-DUP8. When this condition is true, paper allotted voltage that is
set at 2TR-TGT8 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR8, TR-DUP8, 2TR-TGT8
8-191
3
or less
3
3
3
3
3
3
3
or less
3
3
3
3
3
3
8-191